-12%

Audio Technica AT-VM95SP/H Moving Magnet Cartridge incl. AT-HS6 Headshell

5.00 out of 5

Oorspronkelijke prijs was: €119.00.Huidige prijs is: €105.00.

Brand:

met hadshell

Beschikbaarheid: Op voorraad (Voor 17.00 besteld, vandaag verstuurd ma-vr) / On stock (Order before 17.00, shipped today mo-fr) . Artikelnummer: AUDIOTECH-at95sph Categorieën: , , , Tag:

Beschrijving

VM95 series 78rpm SP cartridge on AT-HS6 Headshell

  • AT-VM95SP mounted on AT-HS6BK headshell
  • The total set weight is 15.5g
  • Assembled and tested in the Audio-Technica Factory in Fukui-Japan
 

VM95 Series – Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

 

Conical Bonded (3mil) Stylus

A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Preassembled With AT-HS6BK Headshell

The AT-VM95SP cartridge is fitted onto the 9g aluminiumdie cast body headshell

Type VM Dual Magnet
Mounting Half-inch
Frequency Response 20 – 20,000 Hz
Channel Separation NA
Output Channel Balance 1.5dB
Output Voltage 2.7 mV (mV at 1 kHz, 5 cm/sec)
Vertical Tracking Angle 23°
Vertical Tracking Force Range 4.5 – 5.5g
Stylus Shape Conical
Stylus Size 3.0 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Inductance 550mH (1 kHz)
Static Compliance 12 x 10-6 cm/dyne
Dynamic Compliance 2.0×10-6cm/dyne (100Hz)
Recommended Load Impedance 47,000 ohms
Recommended Load Capacitance 100-200 pF
Weight 15.5g
Dimensions H21.2×W21.4×D62,4mm
Replacement Stylus AT-VMN95SP
   

Extra informatie

Gewicht 1 kg
Gewicht