Beschrijving

AT33PTG/II

Moving Coil Cartridge

• Advanced nude tapered boron and weight reduction
• Thinned down and shortened cantilever
• Coil impedance refined from 17W to 10W
• High performance and long-life MicroLinear™ stylus
• Better high range performance than the conical or elliptical stylus
• Average product lifetime of around 1000 hours

• AT33ptg/II

  Moving Coil Cartridge

  Advanced nude tapered boron and weight reduction
  This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also refined from 17W to 10W. We realized significant weight reduction of the vibration system and successfully improved the basic performance and sound quality of the cartridge.
   
  High performance and long-life MicroLinear™ stylus
  MicroLinear™ (ML) is a specially polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high range reproduction even when playing at the inner circumference of records. And the constancy of the line contact shape is one of its main features with an average product lifetime of around 1000 hours.

  “Outstanding Magnetic properties”

  Neodymium magnet with dramatically enhanced magnetic energy and permendur yoke with high saturation flux density and outstanding magnetic properties.

  “Enables purer transmission”

  The PCOCC coil enables purer transmission because it is not subject to grain boundaries in the direction of transmission.

  “Limits unnecessary vibration”

  The VC mould that affixes the coil is made with hard synthetic resin containing potassium titanate to make it strong and rigid.

  
• TypeDual Moving CoilMounting1/2″ CentersFrequency Response15 – 50,000HzBody MaterialAluminium/Synthetic ResinChannel Separation30dB (1kHz)Output Channel Balance1dB (1kHz)Output Voltage0.3mV (1kHz and 5cm/sec.)Vertical Tracking Angle23°Vertical Tracking Force Range1.8 – 2.2g (2.0g standard)Stylus ShapeMicroLine™Stylus Curvature RadiusMicro linearStylus ConstructionNude Square ShankCantileverGold-plated solid boronCoil Impedance10Ω (1kHz)Coil Inductance22µH (1kHz)DC Resistance10ΩStatic Compliance40×10-6cm/dyneDynamic Compliance10×10-6cm/dyne (100Hz)Terminal PinsBrassRecommended Load ImpedanceMin 100ΩWeight6.9gDimensionsH16×W16.6×D26.5mmReplacement StylusWhen the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.Accessories Included1 non magnetic screw driver; 2 washers; 2 Nuts; 2 x 13 mm mounting screws; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires(AT6101)