-10%

Goldring 2100 MM element

Oorspronkelijke prijs was: €199.00.Huidige prijs is: €179.00.

Brand:

Een van best verkocht goldring elementen

Beschikbaarheid: niet meer leverbaar Artikelnummer: GOLDR-2100 Categorieën: , , Tag:

Stuur bericht zodra er voorraad is

Beschrijving

Goldring 2100

All Goldring 2000 series cartridges feature Moving Iron technology. This lends them the high levels of detail associated with more expensive moving coil designs whilst retaining the convenience of a replaceable stylus and high output associated with moving magnet types. The cartridge employs a fixed samarium cobolt magnet and high output coil combination so that a very light iron/nickel cantilever end-piece can be used instead of the much heavier permanent magnet used in conventional designs. This reduces the moving mass allowing the stylus to trace the record groove more faithfully. Because of their high output, Goldring 2000 series cartridges should be used with the standard moving magnet phono input of an integrated amplifier.

 

The 2100 features a bonded elliptical diamond stylus producing high frequency clarity and quality sound. The 2100 can be used to upgrade many budget turntables.

 

Moving “Iron” Generator

A diamond stylus tracing the average record groove will experience accelerations of up to one thousand gravities. This means that in a moving magnet design the permanent magnet is subjected to similar accelerations and if its mass is too large its inertia will result in poor transient response, distortion and mis-tracking of the stylus. The 2000 series cartridges use a fixed magnet design so that the mass of the magnet is completely isolated by the compliance of the cartridge suspension and a much smaller and lighter iron/nickel alloy tube can be used instead. Attached to the cantilever, the alloy tube is used to perturb the stationary magnetic field provided by the large fixed magnet and thus provide the changing magnetic flux necessary to generate the signal voltage in the coils. Modern samarium cobalt magnets have a super high energy output and so a much lighter magnet can be employed than ever before giving the completed assembly a similar mass to traditional moving magnet types. In this way the cartridge enjoys the convenience and flexibility of a traditional moving magnet design with a replaceable stylus block and a high output compatible with standard MM input stages. At the same time it enjoys some of the refined sound and detail retrieval previously only available from more costly moving coil designs.

Threaded Inserts

The cartridge body benefits from integrated M2.5 threaded mounting holes which means that it is very easy to mount onto the tonearm negating the need for fiddly washers or nuts which need to be counter-held during adjustment.

Frequency Response
20 Hz – 20 kHz +/- 3 dB
Channel Balance
 within 2 dB @ 1kHz
Channel Separation
better than 20 dB @ 1 kHz
Sensitivity
6.5 mV ±1.5 dB, 1kHz @ 5 cm/sec
Static Compliance
20 mm/N
Vertical Tracking Angle
24°
Stylus Radius
Elliptical 0.7 x 0.3 mil
Stylus Type
Replaceable
Cantilever
Aluminium
Load Resistance
47 kΩ
Load Capacitance
100-200 pF
Internal Inductance
550 mH
Internal Resistance
550 Ω
Cartridge Mass
7.4 g
Cartridge Mass (inc fixing screws)
8.6 g
Fixing Centre
12.7 mm (0.5″)
Playing Weight
1.5 – 2.0 g (1.7 g nom.)
Love it!
great on my SL-1200 MKII
Review By: Kris Black
Superb cartridge
This is a outstanding cartridge,just wish the body was square instead of curved..but patience in setting up rewards excellent sound.
Review By: Frank
Excellent cartridge
So pleased that I finally settled on this cartridge for my Pioneer PLX 1000. I took my time to ensure correct set up and the results using my musical fidelity A3.5 integrated with musical fidelity
XLPS with XPSU phono stage are fantastic.
The cartridge delivers a superb lively full bodied performance across all types of music highs are extended as is the bass and the mids are stunning. Great value for money and I would highly recommend this cartridge!
Review By: Phil Henderson
AFTER YEARS OF USE STILL SOUNDS GREAT!

I have been using this cartridge for six years on a Technics 1210 MK2 and still looks great and sound OK.

The cantilever is well care and with no wear or tear.

Review By: INIGOACEDO

Extra informatie

Gewicht 1 kg
Gewicht

2 beoordelingen voor Goldring 2100 MM element

  1. 5 van 5

    W. Schipper (geverifieerde eigenaar)

    Geweldig goed element voor deze prijs. Heb ook nog een veel duurdere, maar deze Goldring 2100 doet daar niet voor onder. Prijs kwaliteitsverhouding is uitstekend.

  2. 4 van 5

    Steven Ramakers (geverifieerde eigenaar)

    Klank is iets te direct, te weinig warme middensound


Een beoordeling toevoegen